ERIKC 0928 400 705 original Bosch metering measure unit 0928400705 chemical auro pump measuring valve 0 928 400 705

metering valve list

Injector FAQ

FAQ: What does the basic inner working parts of a fuel injector consist of?

ERIKC Answer: Most ERIKC fuel injectors consist of a body that houses an electromagnetic coil and a sealing mechanism such as a pintle, ball or disc. These sealing mechanisms are usually kept closed by means of a spring.

Erikc Injectors are fully open or fully closed. The amount of fuel injected is determined by how long the injector is open or by how long the pintle, disc or ball is removed from its seat.

FAQ: How Does a fuel injector work?

ERIKC Answer: Fuel under pressure is sprayed in a very fine mist from the tip of the injector. To achieve this, a current must flow through the injector. Contrary to popular belief, this is NOT done by sending power to the injector. Fuel injectors are normally fed power whenever the ignition key is on, but the circuit is not completed and therefore the injector is still closed. The computer controls the ground side, of the circuit. When the computer provides the ERIKC injector with a ground, the circuit is completed and current is allowed to flow through the injector. This energizes an electromagnetic coil inside the injector, which pulls a sealing mechanism such as a pintle, ball, or disc away from its seat. This makes it possible for fuel to flow through the injector and into the engine. When the computer removes the electrical ground to the injector, the electromagnetic coil becomes demagnetized and a spring forces the pintle, ball, or disc shut to cut off fuel flow.